TCP232-D

DIP Version,Serial UART to RJ45 TCP/IP Module

SKU: TCP232-D Category:
  • Description

    TCP232-D is an ethernet module of UART To RJ45 TCP/IP, based on ZLG company’s ZNE-300TI and ZNE-300T.It is convinient to be installed to PCB and it supports TCP Server, TCP Client,UDP and Virtual serial port.

    Realize TTL and Ethernet Bidirectional Transmission

    This is a serial TTL to Ethernet module,used for data transparent transmission. TCP232-D is a data transparent transmission equipment for converting TCP or UDP socket data to serial UART.

    Product Features of lan module

    • 100M auto detect interface;
    • support AUTO MDI/MDIX, Can use a crossover cable or parallel cable connection;
    • Work mode TCP Server, TCP Client, UDP, UDP Server;
    • Working model related parameters can be set via a serial port or network;
    • 3.3 V TTL level  (module products);
    • Virtual serial port supported;
    • Unique heartbeat package mechanism to ensure that the connection is reliable, put an end to connect feign death;
    • Under UDP mode, Packet Broadcast is prohibited, with stronger anti-interference ability;
    • across the gateway, across switches, routers;
    • Can work in LAN, also can work on the Internet (external network);
    • 32 bits ARM CPU inside;
    • LAN : 10/100Mbps; protect: Built-2KV isolated electromagnetic;
    • serial port baud rate: from 300 to 230400bps can be set up, and up to 3 MBPS;
    • network protocol: ETHERNET ARP IP UDP TCP ICMP;

    Product Features of lan module

    Work Mode of lan module

  • Product Specification

    System Information
    Processor ARM
    Flash 32K byte
    Ethernet
    Port Number 1
    Interface Standard 4 pin interface (with network transformer) TX+,TX-,RX+,RX-
    Rate 10/100 Mbps,MDI/MDIX,auto switch between cross and direct connection
    Protection 1.5KV electromagnetism isolation
    Network Protocol IP,TCP,UDP,ARP,ICMP
    Buffer send: 2K bytes,receive: 1K bytes
    Serial
    Port Number 1
    Interface Standard TTL: 2.54 pin 3.3V
    Data Bits 5,6,7,8
    Stop Bit 1,1.5,2
    Check Bit None,Even,Odd,Space,Mark
    Baud Rate TTL: 110 bps ~ 921.6 Kbps
    Flow Control null
    Buffer send and receive: 800 bytes
    RS-485 Pull-up and Pull-Down Resistor null,reserved 485 send-receive control pin
    Software
    Virtual Serial(USR-VCOM) Windows 2000 or higher(32 bit/64 bit)
    Configuration computer set-up software,serial command
    Basic Parameter
    Size 44 x 32 x 15.4 mm
    Operating Temp. -25 ~ 75°C
    Storage Temp. -40 ~ 85°C,5 ~ 95% RH(no condensation)
    Input Voltage DC 3.3V
    Working Current 200mA(MAX)@ 5V
    Power <1W
    More
    Certificate CE,FCC
    Warranty 2 years
    Accessory null
  • Reviews

    There are no reviews yet.

    Be the first to review “TCP232-D”