Ag7100 provides a cost and footprint optimised 40W isolated DC-DC converter, to boost 12V/24V up to 48V/57V. It is perfect for PoE, PSE or other applications requiring a convenient solution with minimal additional components and easy integration. It is an ideal functional complement to the Ag6100 PSE module.
Ag7100 is typically used to generate the higher (48 to 57V) DC voltages required at the input to an Ag6100, and in this application would be connected as follows:
|· 40W maximum output power|
|· Wide input supply from 11V to 27V DC|
|· Small footprint- 51mm(L) x 30mm(W) x16mm(H)|
|· Suitable for IEEE802.3af and IEEE802.3at designs|
|· Adjustable output from 48V to 57V DC|
|· 1.5kV Isolation compliant with IEEE802.3af/at|
|· Over current, thermal & short circuit protection|
|· Only two external components required|
- Wide input supply 11V – 27VDC
- Maximum power 40W
- Adjustable output from 48V – 57V DC
- Small footprint- 51mm(L) x 30mm(W) x16mm(H)
- 1.5kV isolation
- Over current, thermal & short circuit protection
- High efficiency
- Low noise and output ripple
- Simple integration
Ag9800 Evaluation Board
This is Silvertel’s new EVAL board to cover both the Ag7100 DC-DC converter and it’s complementary and frequently associated Ag6100 PSE module.
It is designed to allow simple and combined or separate testing and evaluation of both Silvertel’s Ag6100 POE PSE module as well as the Ag7100 DC-DC Boost converter. The output of the Ag7100 is linked on the Eval board directly to the input of the Ag6100 as it would be if being used to design a PSE power circuit with 12 or 24V DC input. It is designed to provide a complete Power Sourcing Equipment (PSE) functional power block, with 12 to 27V DC input, and providing up to 40W of PSE output power onto the CAT5/6 cable as an output.